1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 Logic 9+ External Sequencer

Discussion in 'Logic 9' started by PaulLawler, Jan 17, 2012.

  1. PaulLawler

    PaulLawler New Member

    Hi all,

    I have connected my Doepfer Dark Time via Midi to Logic 9.1.5, OSX 10.6.8

    Logic triggers and controls the Dark Time with no problem, but when I select any instrument in the arrangement page, Dark Time starts to trigger that instrument regardless of the fact it may be on a different midi channel than Dark Time is set to send ?

    Is it possible to have Dark Time connected to Logic and set to control one specific instrument (Hardware or AU) without affecting any of the other instruments in the arrangement, instead of just playing whichever instrument is selected ?

    many thanks

  3. PaulLawler

    PaulLawler New Member

    A bit more info as nobody has an answer yet :)

    I can set the Dark Time Sequencer to transmit lets say CH8. I can see in Logic transport bar that it is transmitting CH8. If I load an AU multi such as Kontakt, it only triggers instruments on CH1. With non multi AUs it triggers everything regardless of channel.

    Any ideas at all, I'm spending way too much time in the envioroment and nothing seems obvious ???


  4. Neubit

    Neubit New Member

    Did you ever figured this out? I'm having the same problem.
  5. PaulLawler

    PaulLawler New Member

    Nope, I gave up and moved onto other Logic problems ;)
  6. Neubit

    Neubit New Member

    Hmm. There must be some workarounds ...
  7. Neubit

    Neubit New Member

    It works when I use traditionel Midi instead of the USB.

Share This Page