1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 8 Midi Controllers

Discussion in 'Logic 8' started by Jimmelb, Mar 31, 2009.

  1. Jimmelb

    Jimmelb New Member

    Greetings. I'm after some help on using my Novation xiosynth 25 to input notes into Logic 8 when I use the PPG Wave software instrument.

    When I use the Logic built in instruments it works fine but not with the PPG

    Any help is appreciated.
  3. Peter Ostry

    Peter Ostry Administrator Staff Member

    Maybe the PPG expects a certain MIDI channel?
  4. Jimmelb

    Jimmelb New Member

    I am a novice with all of this. Any idea what I should be setting the ppg to?
    I can't seem to find the settings area for the PPG
  5. Peter Ostry

    Peter Ostry Administrator Staff Member

    My answer was just a guess. I do not know the PPG but the manual will certainly tell you if the MIDI channel is important or not.
  6. Jimmelb

    Jimmelb New Member

    I don't have a manual. Thanks for the guess though. I'll keep looking
  7. reidlowe

    reidlowe New Member

    Can you post a screen shot of the instrument once you enable it and the settings?

    If you drop open the Inst 1 section, you should see your Midi Channel settings, by default they should be set to All...see if this is right.

    Also note, I've selected the track (track 1) if I move to the next track depending on settings, I don't hear anything on Track 1.

    Give that a shot first.


    Attached Files:

  8. Jimmelb

    Jimmelb New Member

    That sorted it. Thanks very much for that.
    Much appreciated
  9. reidlowe

    reidlowe New Member

    No worries mate

Share This Page