Combo Remapper - use score text and symbols to switch articulations
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Panning Echo

Discussion in 'Logic Pro X' started by Jay Denson, Jan 19, 2014.

  1. Jay Denson

    Jay Denson Senior member

    Here's a little trick I used back in the day to get tracks to repeat from left to right - good for ethereal effects. We used a stereo tape machine. Here's how you do it on a DAW:

    Panning Echo Setup

    See attached signal flow diagram.

    Let’s use bus 1 and 2 - they could be any buses you choose.

    Send postfade from source track(s) @ -4.5dB to bus 1

    Also send blind (i.e. send level at - infinity) to bus 2 in order to maintain solo isolate status of bus 2 (do this from every contributing source).

    Use LP tape delay plugin- wet output only - set to 69% both 1 and 2 bus channels.

    Select the delay time you want. Tempo related is usually good.

    Send from bus 1 prefade to bus 2 @ -4.5dB
    Send from bus 2 prefade to bus 1 to get feedback in the loop - as much as you like.

    set bus 1 and 2 faders identically for overall FX level in the mix. Pan bus 1 left and bus 2 right.

    Hope you enjoy this. Jay

    Attached Files:


Share This Page