1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Strange MIO mixer Issue

Discussion in 'Metric Halo' started by Cannikin, Apr 23, 2011.

  1. Cannikin

    Cannikin New Member

    Hello Allan

    I'm experiencing a very odd issue:

    I'm sending tone out from Logic to all 8 analog outputs on my 2882. All the meters on the Hardware are showing tone BUT the MIO mixer shows no meter signal on channel 8 even though hardware shows signal. When I move the fader the hardware meter increases and decreases appropriately but nothing on the Mixer. Also the MIO Console is showing tone on its meter.... very odd.

    Attached is both the mixer configuration and a screen shot of the Mixer, MIO console and Logic. All settings are exactly the same on channels 1 thru 8.

    DSP usage is only 21%

    Attached Files:

  3. Allen Rowand

    Allen Rowand Member

    This is because you created a mix bus for every DAW channel, and MIO Console will only provide metering for 7 busses at this time.

    You don't need those busses; simply assign the Analog outs to the post-insert direct outs of the DAW channels. I've attached a corrected copy of your setup.


    Attached Files:

  4. Cannikin

    Cannikin New Member

    Thanks a bunch Allen.... so much to learn (I mean that in a very positive way)

Share This Page