1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 Varispeed

Discussion in 'Logic 9' started by edurbrow, Nov 5, 2011.

  1. edurbrow

    edurbrow Senior member

    First, I found Varispeed to be a very useful tool for me. I always have a hard time determining the final tempo of a piece. Often that is because while writing I am still working things out and my ears haven't gotten accustomed to the piece.

    So, I used Varispeed and it worked great for a few passes then suddenly I was getting System Overload messages and it wouldn't play at all. The only thing I did was change the I/O Buffer size from 64 to 1024. You would think that would help, right? But it still played fine with that setting for a pass or so. I tried a couple of tempos and I was actually getting closer to the original tempo when it stopped working.
    Anyone have a similar experience?

    Also, I tried to bounce and it did not bounce at the new tempo. If one decides on a new tempo, is going in and using Flextime on every single region the thing to do? That sounds labor intensive.
  3. Doug Zangar

    Doug Zangar Senior member

    I recently had to do some bouncing of a project at various tempos and used varispeed. Seems to me I had to do it in real time to make it work - might want to try a short snippet to see if that does the trick.

    Flextime is applied per track, then disabled/enabled per region.

    Faster than re-recording everything at a new tempo......

Share This Page