Logic Pro 9 2 midi controllers problem help!

[Synthsensation]

I have recently reinstalled Mac osx and updated logic 9, now have problems with midi controllers/channels.

This is the method I use;
1. Set external controllers to different midi channels; ch.1 & ch.2.
2. Set the Logic Software Instruments midi channels to match external controller channels ( i.e ch.1&2 ).
3. Logic Settings -> Recording and enable "Autodemix by midi channel if multitrack recording" which will switch Logic into a "live play" mode.
4. Arm the tracks of the Software Instruments to audition or record.

I have booted with the old OS from external HD, and this method works fine.

Any ideas why it's not working on the new install?

I have tried the channel splitter method for 2 midi controllers and it still works.

 

[Doug Zangar]

This does work in my setup. I've also recently set it up on two other systems. I'm not quite clear why you're having a problem.

At one time I thought there could be an issue in the order of events. You might try step 3 first.