Hi Mark, I monitor outside of Logic via a Mackie Mixer, so I leave the buffer settings maxed-out at 1024. (Unless I need to record a software instrument, but I do that before I start mixing with plugs.) I have plugs on regular tracks, auxes & on the master out. Mostly LA2A & 1176 LN on tracks, Transient Designer on kick & snare, Cambridge EQ on overheads, then all drums bussed to an aux with an 1176. Guitars bussed to Pultec & LA2A, I usually have an 1176 on the lead guitar before it's bussed to the guitar aux. No verb on anything except an aux for the vox & backups & one on the main outs running at about 3-9% depending on the tune. Then it hits the precision EQ, Maximiser & Buss Comp. My comp is a G5 Dual 1.8, 2 gigs RAM, 2 SATA drives at 7200 RPM (One just for recording & storage of music never kept more than 1/4 full) Video is standard Nvidea GeForce FX 5200 64Meg, interface is MOTU 896HD & I'm running 2 (Soon to be 3) UAD-1 cards. I've included a window of a typical mix before vocals, no keys just so you can get an idea as to how it's set up. Hope that's enough info! Lemme kn ow what you think.
Peace - J.