(bottom of page)
DouglasScott
Logician
- Logic version
- 12.0.1
- Mac OS
- Tahoe 26.3 (25D125)
I have an eight-track MIDI project with lots of controller data on each channel. I need to nudge some sections back or forward 1/16th, and I have "Include non-MIDI Events" enabled. When I do this, *most* events move, but not all. My theory is that controller event not directly associated with a note do not (can not?) get selected. Here is a short of the editor before the nudge back 1/16th. Note the alignment of the blue controller with the first note:
And after:
The light-blue "blip" is a section-tracking controller on MIDI channel 1, which did not have an associated MIDI note in the section I nudged. Is there a way to "select all" which will pick this up as well? You can see dimmed in the lower image that all the other controllers did nudge.
Thanks!
-DS
And after:
The light-blue "blip" is a section-tracking controller on MIDI channel 1, which did not have an associated MIDI note in the section I nudged. Is there a way to "select all" which will pick this up as well? You can see dimmed in the lower image that all the other controllers did nudge.
Thanks!
-DS